产品特点Speciality:
·有进出风面区分的特点
·特殊有机合成纤维制造而成,为高密度的卷状滤
·料广泛用于板式过滤器和袋式过滤器
·高性能,高强度的合成纤维递增结构加工而成
·用于一般通风设备和空气控制系统入口处作预过滤或粗过滤
·高容尘量,低阻力,经济实用
·经过吸尘或清洗后可多次使用
·耐温100℃
·Inlet side and outlet side are different.
·Consisted of special organic synthetic fiber,is a kind of high-density pocket filter.
·Be widely used in plank filters and pocket filters.
·It’s processed by high-performance synthetic fiber with gradual density.
·It’s designed for prefiltration or coarse filtration in the inlet of general ventilation and air
conditioning equipment.
·Large dust holding capacity and low resistance,be economical and practical.
·Be workable many times after dust collecting and cleaning;
·Temperature resistance: 100℃
级别
尺寸Dimension
宽
产品特点Speciality:
·应用于表面喷涂高质量漆雾过滤;
·捕捉率高,尤其适合应用于热回收系统;
·高强度的玻璃纤维逐渐加密结构;
·迎风面为绿色,出风面为白色低压缩性能保持其外型不变,使其过滤纤维完全有利于储存油雾灰尘。
·耐温:170℃
·漆雾平均分离效率:≥95%
·It’s applied to high-quality paint spray filter in the surface paint;
·High arrestance efficiency,and especially suitable for heat reclaimer;
·High strength fiberglass with gradual structure;
·Inlet side is green, outlet side is white;low compressibility keeps its shape and makes fiber
deposit paint,mist,soot,etc.
·Temperature resistance:170℃
·Average separation Efficiency:≥95%
性能参数:
尺寸Dimension
初阻力
Initial
Resistance(Pa)
产品特点:
·采用椰子长纤维,经卷曲喷胶辗压成型
·组织无方向性但均匀,捕尘效果佳,压损低
·利用长纤维的特性,吸附力强
·一般粗尘过滤(PREFILTER)
·对乾式喷漆的雾漆(over spray mist)有优异的捕捉性.
·Media pad are lightweight, easy to replace. Continous loag coconut fiber bonded with resin.
Allow deep filtration and have holding capacity. Install in filter holding frames. Especially for
industry inlet and paint spray. Paint stop in outlet.
尺寸
1寸(厚):20″×20″ 24″×24″
2寸(厚):20″×20″ 24″×24″
适用范围:
涂装线烤漆房
通风系统、空调系统等需要过滤微细灰尘之处。
尺寸:长度×宽度:20m×2m 可根据您的要求,提供各种剪裁。
名称
厚度
密度%
初期压损mmag
终期压损mmag
给尘量g/m2
1寸
25-30
80
1.08
1.68
1800
2寸
50-55
80
1.18
1.81
2700